Harbor Freight Tools Automobile Accessories 91729 User Manual

3 SHELF

WOODEN RACK

91729

ASSEMBLY INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

®.

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

9. Replacement parts. When servicing, use only identical replacement parts. Use

of any other parts will void the warranty.

10. Warning: Locate the 3 Shelf Wooden Rack in a spot that is flat without an

uneven surface.

11. Always distribute objects on Shelves evenly. Uneven weight distribution

could cause toppling. Do not allow children to climb on the Shelves or play

with the wooden rack.

Warning: The warnings, cautions, and instructions discussed in this instruc-

tion manual cannot cover all possible conditions and situations that may

occur. It must be understood by the operator that common sense and caution

are factors which cannot be built into this product, but must be supplied by the

operator.

Unpacking

When unpacking, check to make sure the following parts are included. If any parts

are missing or broken, please call Harbor Freight Tools at the number on the cover of

this manual.

Assembly Instructions

1. Assemble all parts on a smooth surface to avoid scratching. Hardware is

provided.

2. Set the Side Walls (1) on the floor. Each Shelf (2) is to have the Back Stop

(3) attached. If not preassembled, attach with Wood Screws (4) in the

predrilled holes. (See Figure A).

Back Stops (3)

Wood Screws

(4)

Shelf (2)

Figure A

Side Wall (1)

Shelf (2)

Figure B

3. Attach each Side Wall (1) to the Three Shelves (2) with the Wood Screws

(4) in the predrilled holes. Do not tighten Screws (4) completely until all the

Shelves (2) are assembled. Check that all is level and then tighten all

Screws (4). (See Figure B).

A varnish or stain may be applied after assembly. Avoid too much moisture

on the shelving unless you use a waterproof bar finish. Avoid tipping

assembled Shelves.

SKU 91729 For technical questions, please call 1-800-444-3353. Page 3

Parts List

Part #

Description

Qty.

Side Wall

Shelf

Back Stop

Wood Screw

Assembly Drawing

Part 2

Part 3

Part 4

Part 1

Part 2

Part 3

Part 4

Part 2

Part 3

Part 4

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS

MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR

MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS

QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO

REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR

EXPRESSLY STATES THat ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN

BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES

ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR

REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE-

MENT PARTS THERETO.

NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.

SKU 91729 For technical questions, please call 1-800-444-3353. Page 4

Amana SKUS ABL1922FES User Manual
Brother MFC 5890CN User Manual
Brother MFC 7840N User Manual
Bryant 561S User Manual
Bryant 704D User Manual
Cecilware Granita Dispenser User Manual
Fisher Price POWER WHEELS H7461 User Manual
Graco IMONITOR 2791 User Manual
Haier HSU 07HS03 User Manual
Heat Controller Comfort Air User Manual