INSTALL INSTRUCTIONS KK-F-ST-SS
FORD FULL SIZE VAN SIDE SLIDE-OUT STEP
1997-2007 FORD VAN (GAS & DIESEL)
TOOLS REQUIRED:
Powered drill
Ratcheting wrench
Tape measure
Drill bit set
Socket Set
HARDWARE:
QTY DESCRIPTION
PART #
4
4
4
2
4
2
¼-20 x ¾” Hex Head Bolt
¼” Flat Washer
¼-20 Serrated Nut
5/16-18 Hex Head Bolt
5/16” Flat Washer
5/16-18 Nylock Nut
GSM33001
GSM31005
GSM30023
GSM33012
GSM31006
GSM30017
SUB ASSEMBLY:
1. Determine and mark center of door opening to help aid in positioning of step.
2. Mark center of step and position step.
INSTALLATION:
1. ATTACH STEP TO VAN FRAME:
• Position step assembly under van on center mark made in sub-assembly.
• (2) Holes on step will line up with (2) holes in frame rail.
•
Attach using (2) 5/16-18 x 1” Hex head bolts, washers and Nylock nuts.
5/16” Bolts,
washers &
Nylock nuts
KK-F-ST-SS-INST-9-06
|