Flavor Fusion 255 Drip Tray to ‘Z’ Style Unit Conversion Installation Instructions
INSTALLATION INSTRUCTIONS
FLAVOR FUSION 255 WITH DRIP TRAY TO ‘Z’ STYLE UNIT CONVERSION
#8-18 X 1/2" LONG SCREW
P/N 620705801
2 PLACES
DETAIL A
SCALE 0.375
ADJUSTABLE FORMING BRACKET
(HELPS TO KEEP SPLASH PANEL
SIDES FLUSH WITH SIDE PANELS,
MOUNT BRACKETS INSIDE OF
SPLASH PANEL)
P/N 620053264
2 PLACES
SEE DETAIL A
'Z' STYLE SPLASH PANEL
P/N 620053350 (SILVER)
EXISTING COLDPLATE
DRAIN BOOTS
2 PLACES
P/N 620053351 (BLACK)
#8-32 MOUNTING SCREWS
2 PLACES
HOSE CLAMP
P/N 70178
4 PLACES
P/N 71086
1" BARB SPLICER
3/4" BARBED ELBOW
2 PLACES
P/N 53293
DRAIN TUBE
P/N 53169
(PLUMB TO EXISTING DRAIN LINE)
P/N 51280
HOSE CLAMP
1 PLACES
P/N 70750
IMPORTANT!!!
BE SURE TO INSULATE ALL FITTINGS/HOSE WITH INSULATION TUBE
AND TAPE SUPPLIED IN KIT. FAILURE TO DO SO WILL LEAD TO CONDENSATION PROBLEMS
THIS EQUIPMENT MUST BE INSTALLED WITH ADEQUATE BACKFLOW PROTECTION
TO COMPLY WITH APPLICABLE FEDERAL, STATE AND LOCAL CODES.
Release Date: July 7, 2006
© 2006, IMI Cornelius Inc.
Revision: B
- 1 -
Publication Number: 629088779INS
|