8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 1
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
BT Baby Monitor 150
User Guide
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 3
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Got everything?
This User Guide provides you with all the
information you need to get the most
• Baby unit
• Parent unit
from your BT Baby Monitor 150.
• 2 x AA rechargeable batteries
Please read this guide carefully and keep
for Parent unit
it for future reference.
• Parent unit charger
• 2 x mains power adapters
(item code 045327)
Need help?
If you have any problems setting up or using your
BT Baby Monitor 150 (or would like additional or
replacement batteries), call the BT Baby Monitor Helpline
0808 100 6554*.
• Travel bag
• Wall mounting bracket for
the Baby unit
Alternatively, you may also find the answer in ‘Help’
at the back of this guide.
* Calls made from within the UK mainland network are free.
Mobile and international call costs may vary.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 4
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
4
In this guide
Setting up
Lullaby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Play lullaby . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Stop lullaby. . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Record a lullaby . . . . . . . . . . . . . . . . . . . . . . . 22
Delete a recorded lullaby. . . . . . . . . . . . . . . . 23
Connect an auxiliary player . . . . . . . . . . . . . . 23
Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Set countdown timer . . . . . . . . . . . . . . . . . . . 23
Start countdown timer. . . . . . . . . . . . . . . . . . 24
Cancel countdown timer . . . . . . . . . . . . . . . . 24
Set count up timer . . . . . . . . . . . . . . . . . . . . . 25
Cancel count up timer . . . . . . . . . . . . . . . . . . 25
Operate the count up timer. . . . . . . . . . . . . . 25
Set clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Set 12 or 24 hour format . . . . . . . . . . . . . . . 26
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Parent unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Baby unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Check the connection . . . . . . . . . . . . . . . . . . 7
Getting to know your Baby Monitor
Parent unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Baby unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using your BT Baby Monitor 150
Switching on/off . . . . . . . . . . . . . . . . . . . . . . 14
Changing Baby unit from
battery to mains power . . . . . . . . . . . . . . . . . 14
Adjust speaker volume. . . . . . . . . . . . . . . . . . 15
Talk Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjust Talk Back volume . . . . . . . . . . . . . . . . 15
Paging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
The Parent unit menu . . . . . . . . . . . . . . . . . . 16
Torch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Nightlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Adjust the temperature alert. . . . . . . . . . . . . 18
Switch temperature alert on or off . . . . . . . . 19
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Select sensitivity level . . . . . . . . . . . . . . . . . . 20
Switch sound alert on or off . . . . . . . . . . . . . 20
Switch vibrate alert on or off. . . . . . . . . . . . . 20
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
General information
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Product disposal. . . . . . . . . . . . . . . . . . . . . . . 30
R&TTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Declaration of Conformance . . . . . . . . . . . . . 31
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 5
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
Setting up
5
IMPORTANT
Your BT Baby Monitor 150 is designed
Parent unit
to be an aid and should not be used as
a substitute for responsible and proper
adult supervision.
1. Plug the mains power cable into the socket marked
back of the Parent unit charger.
on the
Make sure the Baby unit, Parent unit
and mains adapter cable are kept out
of reach of your baby – at least one
metre away.
2. Remove the battery compartment cover and insert the 2 x AA
rechargeable batteries into the battery compartment on the
Parent unit and replace the battery compartment cover as
shown. You should always ensure you have inserted batteries
in the Parent unit.
Never place the Baby unit inside your
baby’s cot, bed or playpen.
Never cover your Parent or Baby units
(e.g. with clothes, towels or blankets).
Never use or place your Parent or Baby
units in moist places or near water.
If travelling abroad, make sure that the
voltage shown on the mains power adapter
corresponds to the local mains power
before connecting to the power supply.
There is a risk of explosion if the batteries
are replaced by an incorrect type.
Dispose of used batteries according to
the instructions.
Always dispose of batteries in
accordance with applicable waste
disposal regulations, never in your
household rubbish.
3. Slot the Parent unit into the charger, the red charging light
comes on. Charge the batteries for 16 hours before switching
on the Parent unit.
Battery performance - Parent unit
Rechargeable batteries in the
Parent unit give up to 14 hours
continuous performance.
Please note however, that new
batteries do not reach full capacity
until they have been in normal use for
several days.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 6
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
6
Setting up
Running rechargeable batteries right
down at least once a week will help
them last as long as possible. The
charge capacity of rechargeable
Baby unit
Once your Parent unit has been fully charged:
batteries will reduce with time as they
wear out, so reducing the performance
time of the Parent unit. Eventually they
will need to be replaced. New batteries
can be obtained from the BT Baby
Monitor Helpline 0808 100 6554*.
1. Plug the power cable into the socket marked
of the Baby unit.
on the back
Connect the other end to the mains power and switch on.
The Parent unit rechargeable batteries
will lose charge over a period of time,
even if switched off.
Using batteries
Battery low warning – Parent unit
When the batteries are low –
Your Baby unit also works on battery power, so that you can
use it even when you are not near to a mains power socket or
during a power cut.
approximately within 1 hour and 30
minutes of running out – the Parent
unit the
icon will come on.
If the batteries are completely flat the
Parent unit will switch off.
1. Using your finger or a coin, turn the battery lock on the back
of the Baby unit anticlockwise so the groove is vertical then
lift off the cover.
WARNING
The re-chargeable battery icon
in the
battery compartment means that only
re-chargeable batteries can be used.
2. Insert 4 x AA Alkaline batteries (not supplied) as shown.
Never use non-rechargeable batteries
in your Parent unit. Use only the
recommended type – 2 x AA
rechargeable (1300mAh NiMH)
batteries – using other types could
permanently damage your unit.
Charge the batteries in accordance with
the instructions given in this user guide.
The Parent unit can still be used when
it is in the charger.
Battery lock
Child tamper proof lock for
the battery compartment.
Temperature range
The display shows temperatures
between 7oC and 33oC.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 7
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Setting up
7
However, the features on your BT Baby
Monitor 150 have been designed to
3. Replace the battery cover, turning the battery lock into the
vertical position again to lock it.
work normally at any temperature
between 0oC and 40oC.
WARNING!
Check the connection
Use only the mains power adapter
supplied. Using an incorrect adapter
may permanently damage your BT
When both Units are switched on, the green link lights on both
Units will come on.
Baby Monitor 150.
The Baby unit will only work from the
batteries if the mains power is off or
disconnected.
If the link between the Units is broken at any time, the link
lights will turn red and flash slowly.
At the Parent unit, you will also hear an alert signal (3 beeps
every 30 seconds) to warn you that there is no communication
between the Units. If this happens, check that the mains
power is plugged in and switched on at the Baby unit.
Battery performance – Baby unit
The recommended batteries are 4 x AA
Alkaline. Not included.
With new batteries, your Baby unit will
give up to 14 hours continuous
performance with the night lights
switched off. This will be less if the
lights are switched on.
Also check that the Units are within range of one another.
During continual use the Baby unit and Parent unit Charger
power adaptors may become warm to the touch. This is
normal and not something to be concerned about.
When the Baby unit is not being used
and is disconnected from the mains
power, you should ensure you remove
the batteries. This will prevent the
batteries discharging.
In the event of power failure, when the power is restored all
your settings will remain unchanged.
Battery low warning – Baby unit
When the batteries are low –
approximately within 30 minutes of
running out – the Baby unit the
icon will come on. However, this will
depend on the type of
batteries used.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 8
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
8
Getting to know your Baby Monitor
Parent unit
From the Parent unit you can listen to your baby and operate the Baby unit by remote control.
Display
Power saving backlight switches off 15
seconds after last button push.
LED Link indicator
Green On
– Linked to Baby unit.
Green flashing – Not linked to Baby unit
– first 30 seconds.
Talk (on side of unit)
Press to talk to your baby.
Red Flashing Not linked to Baby unit
– for longer than 30 seconds.
Up
Increase speaker volume.
Sensitivity / Volume level LEDs
During use, lights indicate:
– Sensitivity level
Scroll up through menu options.
– Volume level
Menu
Press to open the menu.
Torch (on side of unit)
Press and hold to switch on.
Press to switch off.
Press and hold to exit the menu.
Mute
Press to switch the speaker off,
press again to switch it back on.
Select
Press to confirm the menu
option displayed.
Down/Default
Decrease speaker volume.
When lullaby is playing, press to pause
or resume.
Scroll down through menu options.
Used to restore original settings.
Power on/off
Press and hold to switch the power
on or off.
Microphone
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 9
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Getting to know your Baby Monitor
9
Parent unit display icons
s.
Speaker is switched off.
Sound alert is on.
Full battery
Nightlight is on.
Lullaby is playing.
Temperature is within normal levels.
Timer is on.
Mid charge
Low charge
Vibrate alert is on.
Empty
Scrolling bars when charging.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 10
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
10
Getting to know your Baby Monitor
Parent unit charger
Front
Charging light
Indicates parent
unit is charging.
Back
Power socket
For connection to
mains power.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 11
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Getting to know your Baby Monitor
11
Baby unit
Page
Press to page the
Parent unit – useful the nightlight
for finding when it brightness
Brightness
Press to adjust
Nightlight
Press to switch
nightlight on
or off.
Up/Register
Increase speaker
volume.
Down/Default
Decrease
speaker volume.
Used to restore
Play/Stop
Press to play
lullaby, press
again to stop.
Use to enter
is misplaced.
(once nightlight is
switched on).
There are
registration mode. original settings.
three levels.
Record
Lullaby
Used to record your voice
to comfort your baby and
to delete the recorded message.
Press to change
the lullaby.
Link light
Green when linked to
Parent unit.
Flashes if not linked -
first 30 seconds.
Flashes when Talk is
pressed on Parent unit.
Red flashing if not linked
longer than 30 seconds.
Display
Power saving
backlight switches
off 15 seconds
after last
button push.
Power on/off
Press to switch
on or off.
Microphone
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 12
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
12
Getting to know your Baby Monitor
Back of Baby unit
Temperature sensor
Power socket
For connection
to mains power.
Auxiliary input socket
Use to plug in an external audio
source, e.g. MP3 player so you
can play your own choice of
music to baby.
Battery lock
Child tamper proof lock for the
battery compartment.
Underside
Battery lock
Child tamper proof lock for the
battery compartment.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 13
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Getting to know your Baby Monitor
13
Baby unit display icons
Battery full (icon not displayed
when using mains power).
Displayed when the nightlight is on.
Displayed when a lullaby is being played.
Battery half full.
Battery low.
On when the temperature is normal.
Flashing when it is too hot or too
cold for baby.
LED Link
Green On
Green flashing Not linked to Baby unit – first 30 seconds.
Linked to Baby unit.
Red Flashing
Not linked to Baby unit – for longer than 30 seconds.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 14
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
14
Using your BT Baby Monitor 150
Helpline
If you have any problems
Switching on/off
using your BT Baby Monitor 150,
call 0808 100 6554*.
Switch on the Parent unit
1. Press and hold
Keep pressing the
. The Link LED on the far left will illuminate.
button until the 3 LEDs to the far right
illuminate as well. The Parent unit is now switched on and will
search for and link itself to the Baby unit.
Switch on the Baby unit
1. To switch on, press
. The Green Link light comes on to
show that the unit is within range of the Parent unit.
Switching off both units
If you place the Parent and Baby units
too close together you will hear a high
pitched noise, this is normal. The units
are designed to be located at a
distance from one another,
1. To switch Off, press
until the display goes blank and the
link light goes off. Please note, if there is an alert displayed,
you will need to press the button twice.
e.g. in separate rooms.
Do not press the Talk button when
the Baby unit and Parent unit are
positioned in the same room. High-
pitch noise will be generated if the Talk
button is pressed when Baby unit and
Parent unit are close to each other or
within 3 metres distance.
Changing Baby unit from battery to mains power
To conserve battery power on the Baby unit or when the
batteries are low or flat, plug the Baby unit into the mains. If
currently running on batteries and switched on, changing from
battery to mains power will be instant and not affect any of
the settings.
Put down / mute the Parent unit
before you go into the nursery in order
to prevent any high-pitched whistle /
feedback.
You can use the Parent unit to monitor baby while it is charging.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 15
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Using your BT Baby Monitor 150
15
Adjust speaker volume
There are 5 volume levels (and off) on the Parent unit.
The volume level is shown on the display bars,
e.g. level 3 is shown g g g c c .
On the Parent unit, the volume can
be switched off. The display shows
Volume Off.
1. Press
or
. The volume level is displayed.
Changing the volume setting on the Baby unit affects the
volume when you use the Talk Back feature and when
playing a lullaby.
Talk Back
You can use the Talk Back feature to comfort and reassure
your baby.
Whilst using Talk Back you will not be able to hear your baby
until you release
the button.
1. Press and hold
on the Parent unit to speak to baby.
The display on the Parent unit shows Talk and the green link
lights on both Units flash.
2. Release
to hear your baby again.
Adjust Talk Back volume
The Baby unit has 5 volume levels.
1. During Talk Back, press or
increase or decrease the volume.
on the Baby unit to
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 16
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
16
Using your BT Baby Monitor 150
Paging
You can use the button on the Baby unit to find the Parent
unit. This will also reset the speaker volume level, in case it has
been switched off.
1. Press
on the Baby unit. If the Parent unit volume was set
to off, this will automatically reset the volume to the default
volume. The paging alert will sound.
2. To stop the Page alert, press any button on the Parent unit, or
press
again on the Baby unit. If no button is pressed, the
paging tone will stop after 2 minutes.
The Parent unit menu
The
button on your Parent unit can be used to select and
change the settings on the Baby unit without having to risk
disturbing your baby.
You can access the settings by:
1. Press
then
or
to scroll through the options.
Then press
to confirm your choice.
2. Pressing
again will exit the current menu option or the
unit will return to idle.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 17
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Using your BT Baby Monitor 150
17
Torch
1. Press and hold
to switch the torch on.
Press
to switch off.
Nightlight
Set a comforting nightlight with a choice of three
brightness levels.
At the Baby unit
1. On the Baby unit, press
2. Press repeatedly to select the brightness settings.
At the Parent unit:
You can switch the Nightlight On or Off.
to switch the nightlight On or Off.
1. Press
2. Press
,
Light On? or Light Off? is displayed.
to confirm. The Parent unit will then exit the
menu automatically.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 18
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
18
Using your BT Baby Monitor 150
Pre-set temperature alert range
The Baby unit comes with pre-set
minimum and maximum temperatures,
so if the temperature falls below or
goes above the setting an alert will
sound and the display will also show
High or Low as appropriate. Default is
14˚C min. and 23˚C max.
Temperature
Your BT Baby Monitor 150 constantly monitors the
temperature in your baby’s room and alerts you if it gets too
hot or too cold. This temperature is displayed clearly on both
the Baby and Parent units.
You can adjust the minimum /
maximum setting.
Adjust the temperature alert
The Minimum temperature setting can
be between 10oC-19 oC.
You can set a minimum and maximum temperature range so
that your BT Baby Monitor 150 alerts you if the temperature
goes above or below these settings. If this happens, the
display will show High or Low as appropriate.
The Maximum temperature setting can
be between 22oC -30oC.
Healthcare professionals advise that
the ideal temperature for your baby’s
room is between 16oC and 20oC.
1. Press
2. Scroll
scroll
to Temperature. Press
.
IMPORTANT!
to Range and press
.
The temperature sensor used in this
BT Baby Monitor 150 is intended as
a guide, to provide parents with an
indication of the room temperature in
which the unit has been placed.
It is designed to operate within an
approximate tolerance of +/- 1°C
and is not intended to be as accurate
as some medical devices.
3. Press
Press
or
.
to change the minimum temperature setting.
4. Press
Press
or
.
to change the maximum temperature setting.
5. Press
to return to the standby display.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 19
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Using your BT Baby Monitor 150
19
Switch temperature alert on or off
1. Press
2. Alert on/off is displayed, press
3. The current available option will be displayed, either Alert
on? or Alert off? Press to select the option displayed.
4. Press to return to the standby display.
scroll
to Temperature. Press
.
.
Sensitivity
You can change the level of sensitivity on your BT Baby
Monitor 150 to suit your baby. For example, if your baby is a
particularly quiet sleeper, you can increase the sensitivity
levels so that you are sure to hear if baby disturbs or becomes
uncomfortable.
There are 5 different levels.
Level 5 is the most sensitive and the microphone in the Baby
unit is always on.
At levels 1-4, the microphone will be voice activated by the
noise baby makes.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 20
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
20
Using your BT Baby Monitor 150
If you set the sensitivity level too low,
only louder sounds in the baby’s room
will be picked up and communicated
back to you via the Parent unit. The
Unit will not pick up quieter
Select sensitivity level
1. Press
scroll
or
to Sensitivity. Press
.
2. Press
3. Press
to select the level (1-5) you want. Press
.
background noises.
to return to the standby display.
The default sensitivity setting is Level
5 – the microphone is permanently on.
Switch sound alert on or off
1. Press scroll to Sound alert. Press
2. The current available option will be displayed, either Alert
on? or Alert off? Press to select the option displayed.
3. Press to return to the standby display.
.
Sound level visual indicator
Switch vibrate alert on or off
1. Press scroll to Vibrate. Press
2. The current available option will be displayed either Vibrate
off? or Vibrate on? Press to select the option displayed.
3. Press to return to standby.
The noise level from baby’s room is
indicated by the LEDS on the Parent
unit. So even if the loudspeaker is turned
down, you can be alerted visually.
.
There are 7 LEDs noise indicators - 4
green and 3 red - covering a range of
noise levels from 0dB up to 40dB.
Alert tone and vibrating when the
loudspeaker is off
If the Parent unit loudspeaker is turned
off, and the noise level from baby’s
room reaches the 2nd red LED level, the
unit will beep and vibrate to alert you.
You can switch the sound and vibrate
alert settings on or off. The default
setting for both is on.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 21
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Using your BT Baby Monitor 150
21
Lullaby
The Baby unit plays lullabies to gently soothe your baby back to
sleep. Each lullaby is played repeatedly for 15 minutes. Select
one of the five melodies or select Play All for a medley of all 5
lullabies for 15 minutes.
You can also record your own lullaby or story lasting up to 2
minutes. To play your own recorded lullaby, select Own from
the menu list.
You can also plug in an external audio source like an MP3 or
CD player and play music or audiobooks of your own choice.
The auxiliary port is on the back of the Baby unit.
Play lullaby
At the Baby unit:
1. Press
2. Press
. The most recently selected lullaby will be displayed.
to start playing.
At the Parent unit:
1. Press scroll
2. Play? is displayed.
to Lullaby. Press
.
Press
Or
to play the last selected Lullaby.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 22
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
22
Using your BT Baby Monitor 150
Scroll
to Select New and press
. Scroll
or
to
Lullaby 1-5, Own, Aux or Play All and press
.
During playback:
Pause - Press
Resume - Press
Stop - Press
to stop playback for up to 60 seconds.
to resume a paused lullaby.
on the baby unit to stop playback.
Stop lullaby
1. When a lullaby is playing, press
. The display shows
Stop Lullaby?.
2. Press
to stop the lullaby.
If an auxiliary player is connected, this switches off the Baby
unit speaker but does not switch off the auxiliary player.
Record a lullaby
Record your own lullaby or story words up to 2 minutes long.
The Baby unit will stop monitoring
during lullaby recording.
1. Press and hold . Begin recording after the beep. The display
shows REC and the recording time,
The recording must be at least 3
seconds long.
2. To end recording, release
.
To play your recorded lullaby, follow the steps for Play Lullaby
on page 21 and select Own.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 23
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Using your BT Baby Monitor 150
23
Recording is only available when the
memory is empty (after it is deleted).
Delete a recorded lullaby
1. Press and hold . After 2 seconds the displays shows Deleted.
To avoid deleting a recorded message,
press
on the Baby unit to check
2. Release
.
whether the Own prompt is displayed.
If Own is displayed in the lullaby list,
there is a recorded message.
Connect an auxiliary player
Using the
button
When the recording memory is empty,
Plug another player into your Baby unit, to play songs or stories.
At the Baby unit:
a long press of the
start recording.
button will
When there is a recorded message,
1. Plug your player to the auxiliary input socket on the back of
the Baby unit.
a long press of the
delete it.
button will
2. Press the
button repeatedly until you reach the
AUX menu.
3. You can now use the external player.
Timer
Set countdown timer
1. Press
scroll
to Timer. Press
.
The timer can be set to countdown
from 1 minute to 99hours 59 minutes.
2. Display shows Countdown. Press
.
The
icon is displayed along with
the countdown time.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 24
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
24
Using your BT Baby Monitor 150
3. Timer On? is displayed. Press
and press
to select Set Time?
.
4. Press
or
or
to set the number of hours. Press
to set the number of minutes. Press
.
Press
.
5. Press
to return to the previous menu level.
Start countdown timer
1. Press scroll to Timer. Press
.
2. Display shows Countdown. Press
3. Display shows Timer On. Press
.
.
The countdown timer is shown on the display and counts the
seconds down from the time set.
Cancel countdown timer
1. Press
scroll
to Timer. Press
.
2. Display shows Countdown. Press
.
3. Press
4. Press
to display Timer Off? is displayed. Press
.
to return to the previous menu level.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 25
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Using your BT Baby Monitor 150
25
The timer can be set to count up from
1 second to 99 hours 59 minutes.
Set count up timer
1. Press scroll
2. Scroll to Count up. Press
3. Timer On is displayed. Press
4. Press to start the count up timer.
to Timer. Press
.
The
icon is displayed along with
the count up time.
.
.
If countdown is currently running,
the count up timer will not be
Cancel count up timer
available, and vice versa. Only one of
the timers can be used at one time.
1. Press
2. Scroll
3. Press
4. Press
scroll
to Count up. Press
or to display Timer Off? Press
to Timer. Press
.
.
.
to return to the previous menu level.
Operate the count up timer
Use
to operate the count up timer:
1. When the count up timer is stopped and 00:00:00 is
displayed, press to start the counting.
2. When the count up timer is counting up, press
timer, display shows the counted time steadily.
to stop the
3. When the display shows the counted time steadily, press
to reset to 00:00:00.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 26
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
26
Using your BT Baby Monitor 150
Set clock
This sets the clock on both units.
1. Press
2. Scroll
scroll
to Timer. Press
.
to Clock and press
.
3. Set Time is displayed. Press
.
4. Press
5. Press
6. Press
or
or
to set the hour then press
to set the minute then press
.
.
to return to the previous menu level.
Set 12 or 24 hour format
1. Press
2. Scroll
scroll
to Timer. Press
.
to Clock and press
.
3. Set Time is displayed.
4. Scroll
5. Press
6. Press
to Format and press
or to select 12 or 24 hours. Press
to return to the previous menu level.
.
to confirm.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 27
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Using your BT Baby Monitor 150
27
Reset
You can restore all the adjustable settings back to their original
factory settings.
The Parent and Baby units are reset individually.
1. Press
2. Press
to switch the unit off.
again to switch the unit back on.
3. While the unit is switching on, press and hold
until you hear
a beep. The unit will restore all the original factory settings.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 28
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
28
Help
Helpline
If you have any problems using your BT Baby Monitor 150, call 0808 100 6554*.
Link light does not come on
•
•
Check that both the Baby and Parent units are switched on.
If using batteries check that they are correctly installed and that they are not drained.
Link light is flashing green
•
If you have pressed
to use the Talk Back feature, the link light will flash to indicate one-way
communication between the units.
•
•
The Units are searching for a communication link.
Check they are within range of one another and that the mains power (or batteries) are properly
connected.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 29
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
Help
29
Link light is red
•
The link between your Units is broken. You will also hear an alert to let you know there is no
communication between the Units. If this happens, check that the mains power (or batteries) is
correctly connected and that the Units are within range of one another.
Parent unit remains silent or very quiet
•
•
The sensitivity setting may be too low, see page 19.
You may have set the volume too low, see page 15.
You can hear a high pitched noise
•
•
The Units are too close to each other, or the volume setting is too high.
Talk back feature is not working
Check that the volume is loud enough at the Baby unit, see page 15.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 30
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
30
General information
Within the 12 month guarantee period
Cleaning
Both Units have splash resistant grilles and casing.
To clean, wipe with a damp cloth.
If you experience difficulty using the product, prior to
returning your product, please read the Help section
beginning on page 28, or contact the BT Baby
Monitor Helpline for assistance on 0808 100 6554*.
Guarantee
Your BT Baby Monitor 150 is guaranteed for a period
of 12 months from the date of purchase.
In the unlikely event of a defect occurring, please
follow the Helpline’s instructions for replacement
or repair.
Subject to the terms listed below, the guarantee will
provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Baby Monitor
150 or any component thereof, which is identified as
faulty or below standard, or as a result of inferior
workmanship of materials. Products over 28 days old
from the date of purchase may be replaced with a
refurbished or repaired product.
Outside of the 12 month guarantee period:
If your product needs repair after the guarantee
period has ended, the repair must meet the approval
requirements for connection to the telephone
network. We recommend that you contact BT’s
approved repair agent, on 0870 240 5029 or a local
qualified repairer.
The conditions of this guarantee are:
Product disposal instructions
•
The guarantee shall only apply to defects that occur
within the 12 month guarantee period.
The symbol shown here and on the product
means that the product is classed as Electrical
or Electronic Equipment and should not be
disposed with other household or commercial
waste at the end of its working life.
•
•
Proof of purchase is required.
The equipment is returned to BT or its agent as
instructed.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimize the impact on the
environment, treat any hazardous substances and
avoid the increasing landfill.
•
This guarantee does not cover the batteries and any
faults or defects caused by accidents, misuse, fair wear
and tear, neglect, tampering with the equipment, or
any attempt at adjustment or repair other than
through approved agents.
•
This guarantee does not affect your statutory rights.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 31
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796
General information
31
Product disposal instructions for residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For
more information please contact your local authority
or the retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and
check the terms and conditions of the purchase
contract and ensure that this product is not mixed
with other commercial waste for disposal.
R&TTE
This product is intended for use within the UK.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
1999/5/EC.
Declaration of Conformance
Hereby, Vtech declares that this BT Baby Monitor 150
is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
The Declaration of Conformance for the BT Baby
Monitor 150 is available by calling the BT Baby
Monitor Helpline on 0808 100 6554*.
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 32
Offices worldwide
The services described in this publication are subject to availability
and may be modified from time to time. Services and equipment
are provided subject to British Telecommunications plc’s respective
standard conditions of contract. Nothing in this publication forms
any part of any contract.
© British Telecommunications plc 2008.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China
BT Baby Monitor 150 (05/08) Issue 1
|