PRECAUTIONS
Chapter 1 Features and Overview
1-1 Features
1-2 Buttons and Indicators
1-3 Functions and Basic Operation
Chapter 2 Settings and Adjustments
2-1 Utility Disk
2-2 Screen Adjustment
2-3 Color Adjustment
2-4 Off Timer Settings
2-5 Power Indicator/EIZO Logo Display Setting
2-6 Locking Buttons
2-7 Setting Adjustment menu Display
2-8 Viewing Information/Setting Language
2-9 Setting BrightRegulator
2-10 Resumption of Default Setting
Chapter 3 Connecting Cables
3-1 Connecting Two PCs to the Monitor
Chapter 4 Troubleshooting
Chapter 5 Reference
5-1 Attaching an Arm (Option)
5-2 Power Saving Mode
5-3 Cleaning
5-4 Glossary
5-5 Preset Timing
Important
How to Setup
Please read the Setup Manual (separate volume)
PleasereadthisUser’sManual,SetupManual
(separate volume) and Specifications Sheet
carefully to familiarize yourself with safe and
effective usage.
Specifications
Please read the Specifications Sheet on the CD-ROM.
PRECAUTIONS
IMPORTANT
• This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is
used outside the region, it may not operate as specified in the specifications.
• To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on
the monitor.
[Location of Caution Statement]
(Example of height adjustment stand)
PRECAUTIONS
1
WARNING
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment damage.
If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not
continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
PRECAUTIONS
2
WARNING
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire
or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the arm
stand and install the unit securely.
Not doing so may cause the unit to become unattached, which may result in injury or
equipment damage. When the unit is dropped, please ask your dealer for advice. Do not
continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
When reattaching the tilt stand, please use the same screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, please wash thoroughly.
If some physical symptoms result, please consult your doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
PRECAUTIONS
3
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord
attached is dangerous. It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both hands
ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet.
• Do not place any objects on the ventilation slots.
• Do not install the unit in a closed space.
• Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or
equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the
power cord from the wall socket after turning off the power switch for the
safety and the power conservation.
PRECAUTIONS
4
LCD Panel
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing
pixels or lit pixels does not indicate damage to the LCD monitor.
Percentage of effective pixels: 99.9994% or higher.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints
left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the screen, it may deteriorate
or damage your LCD panel. Leave the screen white to decrease the prints.
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause damage to the monitor.
To use the monitor comfortably
An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the
environmental conditions.
Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
PRECAUTIONS
5
CONTENTS
2-6 Locking Buttons ............................................ 17
PRECAUTIONS ...................................................... 1
● To lock operation [Adjustment Lock]................. 17
LCD Panel................................................................... 5
To use the monitor comfortably............................... 5
2-7 Setting Adjustment menu Display................ 17
● To update menu settings [Menu Position] ........ 17
2-8 Viewing Information/Setting Language ....... 18
● To check viewing information,
Chapter 1 Features and Overview ..................... 7
usage time, etc................................................. 18
● To set a language to be displayed
1-1 Features............................................................ 7
1-2 Buttons and Indicators.................................... 7
1-3 Functions and Basic Operation...................... 8
[Language] ....................................................... 18
2-9 Setting BrightRegulator ................................ 18
● [BrightRegulator] to set “Enable” or “Disable” for
BrightRegulator................................................. 18
Chapter 2 Settings and Adjustments .............. 10
2-10 Resumption of Default Setting ..................... 18
● To reset color adjustment [Reset]..................... 18
● To reset all settings [Reset] .............................. 18
2-1 Utility Disk ...................................................... 10
● Disk contents and software overview............... 10
● To use ScreenManager Pro for LCD (USB model
of S1721/S1731/S1921/S1931) ....................... 10
Chapter 3 Connecting Cables .......................... 19
3-1 Connecting Two PCs to the Monitor............ 19
2-2 Screen Adjustment.........................................11
Digital Input...........................................................11
Analog Input .........................................................11
Chapter 4 Troubleshooting............................... 20
Chapter 5 Reference ......................................... 22
2-3 Color Adjustment........................................... 14
Simple adjustment [FineContrast mode] .......... 14
● FineContrast Mode........................................... 14
Advanced Adjustments [Adjustment menu]..... 15
5-1 Attaching an Arm (Option)............................ 22
5-2 Power Saving Mode....................................... 23
5-3 Cleaning.......................................................... 23
5-4 Glossary ......................................................... 24
5-5 Preset Timing................................................. 25
●
To select an appropriate mode for images ....... 15
● To set/adjust color ............................................ 15
2-4 Off Timer Settings.......................................... 16
● To set monitor power-off time [Off Timer] ......... 16
2-5 Power Indicator/EIZO Logo Display Setting 16
● To turn off the Power indicator while a screen is
displayed [Power Indicator Setting].................. 16
● To display EIZO logo
[EIZO Logo Hiding Function]............................ 16
CONTENTS
6
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1 Features
• Dual-input compliant (DVI-D and D-sub mini 15-pin connectors)
• DVI digital input (TMDS) compliant
• Horizontal scan frequency: Analog: 24.8 - 80 kHz, Digital: 31 - 64 kHz
• Vertical scan frequency: Analog: 50 - 75 Hz
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)
Resolution: 1280 dots × 1024 lines
• Stereo speakers*1
• BrightRegulator function incorporated
• FineContrast mode to allow the best mode for screen display
• Ultra slim bezel
1-2 Buttons and Indicators
Chapter 1 Features and Overview
7
1-3 Functions and Basic Operation
To adjust the screen and color
Adjustment menu (Refer to page 9 for operation)
(for analog signal input only)
Page 11
Screen Adjustment
1
(Automatic Adjustment)
●
●
[Screen] to adjust flickering and
position ……………………………… see page 11
[Range] to adjust color gradation
automatically ……………………… see page 13
Adjustment menu (Refer to page 9 for operation)
Adjustment menu (Refer to page 9 for operation)
(for analog signal input only)
Page 14
Page 11
Color Adjustment
Screen Adjustment
2
Advanced Adjustment [Adjustment menu]
(Advanced Adjustment)
[Adjustment menu]
●
“Brightness,” “Temperature,” and “Gain” can be
set for each mode (Custom/sRGB/Text).
●
●
[Clock] to remove vertical bars …… see page 12
[Phase] to remove horizontal flickering
and blur/distortion ………………… see page 12
[Position] to correct screen position
[Hor. Position] ……………………… see page 12
[Ver. Position] ……………………… see page 12
Settable functions vary with the display mode.
Resuming the default settings
Reset color adjustment [Reset] …… see page 18
●
●
Shortcut button operation
Brightness Adjustment*1
Page 15
Page 15
Press
or
to adjust brightness.
Brightness Adjustment*2
Press
or
to adjust brightness.
Volume Adjustment*1
Press
or
to adjust volume.
1
*
:Speaker applied model
2
*
:Speaker non-applied model
Chapter 1 Features and Overview
8
To make useful settings/adjustments
Adjustment menu (Refer to below for operation)
Information
●
[Information] to check displayed input signals,
monitor information, usage time, etc.
Adjustment menu (Refer to below for operation)
Language
●
[Information] to check settings, usage time, etc.
Set the off timer
●
[Off Timer] to set the monitor power off time
……………………………………… see page 16
●
[Language] to select Adjustment menu language.
Adjustment menu settings
●
[Menu Position] to change Adjustment menu
settings ……………………………… see page 17
Power Indicator Setting
●
[Power Indicator Setting] to turn off the indicator
while the screen is displayed……… see page 18
Page 16
EIZO Logo Display Setting
●
[EIZO Logo Appearing Function] to display or not
to display the EIZO logo
BrightRegulator setting
●
[BrightRegulator] to set Enable/ Disable of
BrightRegulator …………………… see page 18
Locking Adjustment
Resume the factory default settings
[Reset] to reset all settings………… see page 18
●
[Adjustment Lock] to lock operation of the monitor
●
Page 19
Connecting Cables
●
Connecting Two PCs to the Monitor
Basic operation of Adjustment menu
[Displaying Adjustment menu and selecting function]
(1) Press . The main menu appears.
(2) Select a function with
(3) Select a function with
or
or
, and press
, and press
. The sub menu appears.
. The adjustment/setting menu appears.
, and press . The setting is saved.
(4) Adjust the selected item with
or
[Exiting Adjustment menu]
(1) Choose
(2) Choose
<Return> from the sub menu and press
<Exit> from the main menu and press
.
.
NOTE
• The Adjustment menu can also be exited by pressing
twice quickly.
Chapter 1 Features and Overview
9
Chapter 2 Settings and Adjustments
2-1 Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and
the overview of the application software programs.
●
Disk contents and software overview
The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. Refer to
“readme.txt” or the “Readme” file on the disk for software startup procedures or file access procedures.
Item
Overview
For Windows
For Macintosh
A “readme.txt” or “Readme” file
Monitor information file (INF file)
○
○
Available for setting the best resolution
and refresh rate for the monitor.
○
○
−
○
Color Profiles (ICC Profiles)
Screen Adjustment Program
Color profiles
Available for easy adjustments of the
monitor screen following adjustment
patterns and procedures on the
screen.
○
○
ScreenManager Pro for LCD (for
Windows) application software
A utility software program to control
monitor adjustments from a PC using
(USB model of S1721/S1731/S1921/ its mouse and keyboard.
○
−
S1931)
(A PC must be connected to the
monitor with the supplied USB cable.)
Refer to the description later.
User’s Manual of this monitor (PDF file), Specifications Sheet (PDF file)
●
To use ScreenManager Pro for LCD (USB model of S1721/S1731/S1921/S1931)
For the installation and use of ScreenManager Pro for LCD, refer to its User’s Manual on the disk.
To adjust the monitor using ScreenManager Pro for LCD, connect a PC to the monitor with the supplied USB cable.
[Connection]
(1) Connect the USB port (downstream) of a USB compatible PC (or other USB hub) and the monitor’s USB port
(upstream) with the supplied USB cable.
(2) The USB function is set up automatically upon connection of the USB cable.
Upstream
Chapter 2 Settings and Adjustments
10
2-2 Screen Adjustment
Digital Input
Attention
• Wait 20 minutes or more from
monitor power on before starting
adjustments.
When digital signals are input, images are displayed correctly based on the
preset data of the monitor.
Analog Input
The monitor screen adjustment is used to suppress flickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
To use the monitor comfortably, adjust the screen when the monitor is set up for
the first time or when the settings of the PC in use are updated.
NOTE
• Use “Screen Adjustment Program” on
the supplied EIZO LCD Utility Disk.
The auto-adjustment function works in the following cases:
• When a signal is input into the monitor for the first time
• When a signal is input into the monitor for the first time after the
resolution or refresh rate of input signals is changed
Attention
• This function works correctly when
an image is fully displayed over the
Windows or Macintosh display area.
It does not work properly when an
image is displayed only on a part of
the screen (DOS prompt window, for
example) or when a black background
(wallpaper, etc.) is in use.
• This function does not work correctly
with some graphics boards.
• “Auto in Progress” appears on the
screen during auto adjustment.
[Adjustment Procedure]
Automatic Adjustment
To adjust screen automatically [Screen]
1
(1) Choose
.
<Screen> from the <Auto Adjustment> menu, and press
(2) Choose <Execute>, and Press
(3) Flickering, screen position, and screen size are corrected by the auto-
.
adjustment function.
If satisfactory adjustment cannot be obtained with the auto-
adjustment function, perform the adjustment following the
procedure below. When the screen is displayed correctly, go to step
4 “Range Adjustment”.
NOTE
Advanced Adjustment
• For how to start the Screen
Adjustment Program, refer to
“readme.txt” or the “Readme” file.
When you are using a Windows PC,
you can run the program directly from
the start menu of the disk.
• If no adjustment program is available
for your PC, display a checkerboard
pattern on the screen (see below) and
go to the following steps.
Run the Screen Adjustment Program.
2
Load the EIZO LCD Utility Disk on the PC, and start the Screen
Adjustment Program compatible with the PC in use.
After the program starts up, perform the adjustment in step 3 following the
instructions of the program.
Chapter 2 Settings and Adjustments
11
NOTE
Perform advanced adjustments for the following using the
<Screen> menu of the Adjustment menu.
3
• Press the control button slowly so as
not to miss the adjustment point.
• When blurring, flickering or bars
appear on the screen after adjustment,
proceed to [Phase] to remove
flickering or blurring.
● To eliminate vertical bars [Clock]
(1) Choose
<Clock> from the <Screen> menu, and press
.
The <Clock> menu appears.
(2) Adjust the clock with
or
, and press
.
Attention
The adjustment is completed.
• Flickering or blurring may not be
eliminated depending on your PC or
graphics board.
NOTE
• When vertical bars appear on the
screen after adjustment, go back to
“To eliminate vertical bars [Clock].”
(Clock → Phase → Position)
● To remove flickering or blurring [Phase]
(1) Choose <Phase> from the <Screen> menu, and press
.
The <Phase> menu appears.
(2) Adjust the phase with
or
, and press
.
The adjustment is completed.
● To correct screen position
[Horizontal Position], [Vertical Position]
Since the number of pixels and the pixel positions are fixed on
the LCD monitor, only one position is provided to display images
correctly. The position adjustment is made to shift an image to the
correct position.
(1) Choose
<Hor. Position> and or
<Ver. Position> from the
<Screen> menu, and press
.
The <Hor. Position> or <Ver. Position> menu appears.
(2) Adjust the position with
or
to display the image properly
in the display area of the monitor.
Chapter 2 Settings and Adjustments
12
Adjust the signal output range
4
● To adjust color gradation automatically [Range Adjustment]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Choose
press
<Range> from the <Auto Adjustment> menu, and
.
(2) Choose <Execute>, and press
.
(3) Color gradation is adjusted correctly by the auto-adjustment
function.
The output range is adjusted automatically to display images with the
maximum color gradation.
All the adjustments using the “Screen Adjustment Program” are completed.
Chapter 2 Settings and Adjustments
13
2-3 Color Adjustment
Simple adjustment [FineContrast mode]
This function allows you to select the best display mode for monitor brightness,
etc.
(1) Choose
<Color Mode> from the <Color> menu.
or , and press
(2) Choose [Custom], [sRGB] or [Text] with
.
●
FineContrast Mode
An appropriate display mode is selectable out of three modes.
Mode
Custom
Purpose
Available for making desired setting.
Suitable for color matching with sRGB compatible
peripherals.
sRGB
Text
Suitable for displaying texts for word processing or
spreadsheets.
Chapter 2 Settings and Adjustments
14
Attention
Advanced Adjustments [Adjustment menu]
• Perform [Range Adjustment] before
starting color adjustment for analog
input signals.
Independent setting and saving of color adjustment are available for each
FineContrast mode.
Refer to “To adjust color gradation
automatically” on page 13.
• The FineContrast mode cannot be
changed during color adjustment. Set
the FineContrast mode in advance on
the color mode screen.
• Wait 20 minutes or more from
monitor power on before starting the
color adjustment.
• Choose [Reset] from the Color menu
to revert to the default setting (factory
setting) of the color tone of the
FineContrast mode selected.
• The same image may be seen in
different colors on multiple monitors
due to their monitor-specific
characteristics. Make fine color
adjustment visually when matching
colors on multiple monitors.
●
To select an appropriate mode for images
: Adjustment/setting available −: Factory setting
FineContrast mode
Icon
Function
Brightness
Custom
sRGB
Text
−
−
−
−
Temperature
Gain
Reset
Menu
Description
Adjustment range
0 to 100%
Brightness To adjust the full screen
brightness as desired
NOTE
• Adjustable functions vary depending
on the type of FineContrast mode.
• You can also adjust the brightness by pressing
• You can also adjust the brightness by pressing
or
or
*1.
*2.
Temperature To select a color
“OFF,” “5000K,” “6500K,” or
“9300K”
temperature
NOTE
• The values shown in the Kelvin (K) are available only as
reference.
• While color temperature is adjusted, <Gain> is adjusted
automatically according to the color temperature.
• When <Gain> is set, color temperature setting is disabled,
and is set to “OFF”.
Gain
To adjust red, green, and
blue to a desired color tone Adjust the respective brightness of
0 to 100%
respectively
red/green/blue to make a desired
color tone. Display an image with
white or gray background for
adjustment.
NOTE
• Values shown in percentage are available only as reference.
• The <Temperature> setting invalidates this setting. The
<Gain> setting varies with color temperature.
Reset
To reset the color settings of the selected FineContrast mode to
the default settings.
●
To set/adjust color
(1) Choose <Color> from the Adjustment menu, and press
.
(2) Select a desired function from the <Color> menu, and press
The selected function menu appears.
.
(3) Adjust the selected item with
The adjustment is completed.
or
, and press
.
1
*
*
:Speaker applied model
2
:Speaker non-applied model
Chapter 2 Settings and Adjustments
15
2-4 Off Timer Settings
Attention
●
To set monitor power-off time [Off Timer]
• The Off Timer functions even in the
power saving mode, but the advance
notice is disabled. The monitor power
is turned off without advance notice.
This function allows the monitor to automatically turn off after a specified time
has passed. This function serves to reduce afterimages caused when the monitor
screen is left on for a long time period without use. Use this function when an
image is displayed throughout the day.
[Off Timer System]
Timer
Monitor
Operating
Power Indicator
Blue
ON time (1H - 23H)
Last 15 min. in “ON time” Advance Notice*1
Flashing blue
Off
“ON time” expired
Power Off
1
*
When
is pressed during the advance notice period, the monitor continues to operate for
additional 90 minutes. Extension of operation time can be set without limitation.
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose
<Off Timer> from the <Others> menu, and press
.
The <Off Timer> menu appears.
(3) Select “Enable” with
or
, and press
.
(4) Set a monitor ON time (1 to 23 hours) with
The Off Timer setting is completed.
or
, and press
.
[Resumption Procedure]
Press
.
2-5 Power Indicator/EIZO Logo Display
Setting
NOTE
●
To turn off the Power indicator while a screen is displayed
[Power Indicator Setting]
• The Power indicator lights up at
power on with the default setting.
This function enables to turn off the Power indicator (blue) while a screen is
displayed.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Power Indicator> from the <Others> menu, and press
.
The <Power Indicator> menu appears.
(3) Select “Disable” with
or
, and press
.
The Power Indicator setting is completed.
NOTE
●
To display EIZO logo [EIZO Logo Hiding Function]
• The logo appears with the default
setting.
When this unit is turned on, the EIZO logo appears at the center of the screen.
Selection to display or not to display the logo is available with this function.
[Procedure]
(1) Press
(2) Press
to power off the unit.
again while pressing
.
The EIZO logo does not appear on the screen.
[Resetting]
(1) Press
(2) Press
to power off the unit.
again while pressing
.
The logo appears again.
Chapter 2 Settings and Adjustments
16
2-6 Locking Buttons
●
To lock operation [Adjustment Lock]
This function locks the buttons to retain the status adjusted or set once.
Buttons that can be
locked
•
(Enter button) Adjustments/settings using
Adjustment menu
Buttons that cannot
be locked
•
•
•
(Power button)
(Input signal selection button)
(Volume control button) or
control button)*1
(Brightness
•
(Brightness control button)*2
[Procedure]
(1) Press
(2) Press
to turn off the unit.
again while pressing
.
The screen is displayed with the adjustment lock.
[Unlocking]
(1) Press
(2) Press
to turn off the unit.
again while pressing
.
The screen is displayed with the adjustment lock released.
NOTE
• Five positions (center/ upper right/
lower right/ upper left/ lower left) can
be selected.
2-7 Setting Adjustment menu Display
●
To update menu settings [Menu Position]
Menu Position
Adjust the menu position using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose
<Menu Position> from the <Others> menu, and press
.
The <Menu Position> menu appears.
(3) Select a menu position with
or
, and press
.
The menu position setting is completed.
1
*
*
:Speaker applied model
2
:Speaker non-applied model
Chapter 2 Settings and Adjustments
17
2-8 Viewing Information/Setting Language
NOTE
●
To check viewing information, usage time, etc.
• The usage time is not always “0”
when you purchase the monitor due
to factory inspection.
[Information]
This function allows you to check viewing information, model name, serial
number, and usage time of the monitor.
(1) Choose
<Information> from the Adjustment menu, and press
to check viewing information, etc.
.
The <Information> menu appears.
(2) Then, press
●
To set a language to be displayed [Language]
Select the Adjustment menu language.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Mandarin/Cantonese/Japanese
(1) Choose <Language> menu from the Adjustment menu, and press
.
The <Language> menu appears.
(2) Select a language with
or
, and press
.
The language setting is completed.
2-9 Setting BrightRegulator
●
[BrightRegulator] to set “Enable” or “Disable” for
BrightRegulator.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose < BrightRegulator> from the <Others> menu, and press
.
The BrightRegulator setting window appears.
(3) Select “Enable” or “Disable” with
The BrightRegulator setting is completed.
or
, and press
.
2-10 Resumption of Default Setting
●
To reset color adjustment [Reset]
Resume the default settings (factory settings) for color adjustment.
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Reset> from the <Color> menu, and press
.
.
The <Reset> menu appears.
(3) Select <Reset> with
NOTE
• For default settings, refer to “Main
default settings (factory settings)” in
Specifications Sheet.
Chapter 2 Settings and Adjustments
18
Chapter 3 Connecting Cables
3-1 Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-D and the D-Sub
mini 15 pin connector on the back of the monitor.
Connection examples
D-sub mini
DVI-D connector 15-pin Connector
To PC 2
To PC 1
D-sub mini 15-pin
DVI-D connector
Connector
Signal cable
(Digital) FD-C39
Signal cable
MD-C87
Selecting input signal
Input Signal Selection button
NOTE
• The monitor recognizes the connector
through which PC signals are input.
When either PC is turned off or enters
the power-saving mode, the monitor
automatically displays signals of
another PC.
Switch the input signal with
. Input signal switches each time
is pressed.
When the signal is switched, the active signal type (Analog or Digital) appears
at the top right corner of the screen for two seconds.
Chapter 3 Connecting Cables
19
Chapter 4 Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
• No-picture problems → See No.1 - No.2.
• Imaging problems → See No.3 - No.11.
• Other problems → See No.12 - No.13.
Problems
Possible cause and remedy
1. No picture
• Power indicator does not light.
• Check whether the power cord is connected correctly. If
the problem persists, turn off the monitor, and then turn it
on again a few minutes later.
• Power indicator is lighting blue.
• Power indicator is lighting orange.
• Check Gain setting. (see page 15)
• Operate the mouse or keyboard.
2. The message below appears.
• This message appears when no signal is input.
This message appears when the signal is not input
correctly even when the monitor functions properly.
• The message shown left may appear, because some
PCs do not output the signal soon after power-on.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly.
• The message below shows that the input signal is
out of the specified frequency range. (Such signal
frequency is displayed in red.)
• Select an appropriate display mode using the graphics
board’s utility software. Refer to the manual of the
graphics board for details.
Example:
3. Display position is incorrect.
• Adjust image position so that it is displayed properly
within the display area using the
<Ver.Position> adjustment.
<Hor.Position> and
• If the problem persists, use the graphics board’s utility
software if available to change the display position.
4. Vertical bars appear on the screen or a part of the
image is flickering.
• Adjust using <Clock> from <Screen> menu at the
Adjustment menu.
5. Whole screen is flickering or blurring.
• Adjust using
<Phase>.
6. The screen is too bright or too dark.
7. Afterimages appear.
• Adjust
<Brightness>. (The LCD monitor backlight
has a fixed life span. When the screen becomes dark or
begins to flicker, contact your local dealer.)
• Use a screen saver or off timer function for a long-time
image display.
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
Chapter 4 Troubleshooting
20
Problems
8. Green/red/blue/white dots or defective dots remain • This is due to LCD panel characteristics and is not a
on the screen. failure.
9. Interference patterns or fingerprints remain on the • Leave the monitor with a white screen. The symptom
screen. may disappear.
10. The Main menu of Adjustment menu does not start. • Check for Adjustment Lock function.
Possible cause and remedy
11. The auto-adjustment function does not work
correctly.
• This function does not work when digital signal is input.
• This function works correctly when an image is fully
displayed over the Windows or Macintosh display area.
It does not work properly when an image is displayed
only on a part of the screen (DOS prompt window, for
example) or when a black background (wallpaper, etc.) is
in use.
This function does not work correctly with some graphics
boards.
12. Frequency does not change after the utility disk is • Change the input signal frequency using the graphics
installed on Windows 98/Me/2000/XP.
13. No audio output*1
board’s utility software.
• Check whether <Volume> is set to “0”.
• Check the settings of the PC and the audio playback
software.
*1: Speaker applied model.
Chapter 4 Troubleshooting
21
Chapter 5 Reference
5-1 Attaching an Arm (Option)
Attention
The stand can be removed and replaced with an arm (or another stand) to be
attached to the monitor. Use an arm or stand of EIZO option.
• When attaching an arm or stand,
follow the instructions of their user’s
manual.
• When using another manufacturer’s
arm or stand, confirm the following in
advance and select one conforming to
the VESA standard. Use the M4 × 12
screws supplied with this monitor.
– Clearance between the screw holes:
100 mm × 100 mm
– Thickness of plate: 2.6 mm
– Strong enough to support weight of
the monitor unit (except the stand)
and attachments such as cables.
• Attach an arm or stand to meet the
following tilt angles of the monitor.
– Up 60 degrees, down 45 degrees
– Up 45 degrees, down 45 degrees
(vertical display, 90 degrees
[Attaching]
Lay the LCD monitor on a soft cloth spread over on a stable
1
surface with the panel surface facing down.
Remove the stand. (Prepare a screwdriver.)
2
Unscrew the four screws securing the unit and the stand with the
screwdriver.
Attach the monitor to the arm or stand.
3
Secure the monitor to the arm or stand using the screws specified in the
user’s manual of the arm or stand.
clockwise)
• Connect the cables after attaching an
arm.
• If you need to remove the EZ-UP
stand, turn the panel on the monitor
to the left and right a little to appear
the four screws positioned under the
stand. Then unscrew the four screws.
Fixing screws: M4 × 12mm 4 pcs
Chapter 5 Reference
22
5-2 Power Saving Mode
Analog input
This monitor complies with the VESA DPMS standard.
[Power Saving System]
Power
Indicator
PC
Monitor
Operating
Operating
Power saving
Blue
Orange
Power
saving
STAND-BY
SUSPENDED OFF
[Resumption Procedure]
(1) Operate the mouse or keyboard to resume the normal screen.
Digital input
This monitor complies with the DVI DMPM standard.
[Power Saving System]
The monitor enters the power saving mode in fi ve seconds in connection with
the PC setting.
PC
Monitor
Operating
Power saving
PowerIndicator
Operating
Powersaving
Blue
Orange
[Resumption Procedure]
• Operate the mouse or keyboard to resume the normal screen from the PC’s
power saving mode.
Attention
5-3 Cleaning
• Never use any solvents or chemicals,
such as thinner, benzene, wax,
alcohol, and abrasive cleaner, which
may damage the cabinet or LCD
panel.
Clean the monitor periodically to keep the monitor clean and extend its life.
Cabinet
Clean the cabinet with a soft cloth dampened with little mild detergent.
LCD Panel
• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning
paper.
NOTE
• Optional ScreenCleaner is
recommended for cleaning the panel
surface.
• Remove persistent stains gently with a cloth dampened with little water, and
then clean the LCD panel again with a dry cloth for better finishing.
Chapter 5 Reference
23
5-4 Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in
use, when the analog input signal is converted to a digital signal for image display.
This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen.
DVI (Digital Visual Interface)
DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.
This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors. One is
a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and analog signal
inputs.
DVI DMPM (DVI Digital Monitor Power Management)
DVI DMPM is a digital interface power-saving function. The “Monitor ON (operating mode)” and “Active Off
(power-saving mode)” are indispensable for DVI DMPM as the monitor’s power mode.
Gain
This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by the light
passing through the panel color filter. Red, green and blue are the three primary colors. All the colors on the screen
are displayed by combining these three colors. The color tone can be changed by adjusting the light intensity (volume)
passing through each color’s filter.
Phase
Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is made to
adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted correctly.
Resolution
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. The monitor
consists of 1280 horizontal pixels and 1024 vertical pixels. At a resolution of 1280 × 1024, all pixels are illuminated
as a full screen (1:1).
sRGB (Standard RGB)
International standard for “color reproduction and color space” among peripheral devices (such as monitors, printers,
digital cameras, scanners). sRGB allows Internet users to closely match colors as a simple color matching means for
the Internet use.
Temperature
Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The screen
becomes reddish at a low temperature, and bluish at a high temperature, like the flame temperature.
5000K: Slightly reddish white
6500K: Warm white like paper white
9300K: Slightly bluish white
TMDS (Transition Minimized Differential Signaling)
A signal transmission system for digital interface.
VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling)
VESA provides the standardization of signals from PC (graphics board) for power saving of PC monitors. DPMS
defines the signal status between PC and monitor.
Chapter 5 Reference
24
5-5 Preset Timing
The following table shows factory preset video timing.
Attention
• Display position may be deviated
depending on the PC connected,
which may require screen adjustment
using Adjustment menu.
Frequency
Mode
Dot clock
Horizontal: kHz Polarity
Vertical: Hz
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
31.47
59.94
31.47
70.09
35
66.67
49.73
74.55
68.68
75.06
74.76
74.76
24.83
56.42
31.5
Negative
Negative
Negative
Positive
Negative
Negative
Negative
Negative
Negative
Negative
Positive
Positive
Negative
Negative
Negative
Negative
Negative
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Negative
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
• If a signal other than those listed in
the table is input, adjust the screen
using the Adjustment menu. However,
screen display may still be incorrect
even after the adjustment.
• When interlace signals are used, the
screen cannot be displayed correctly
even after screen adjustment using the
Adjustment menu.
VGA 640×480@60Hz
VGA 720×400@70Hz
25.2 MHz
28.3 MHz
30.2 MHz
57.3 MHz
100.0 MHz
126.2 MHz
21.0MHz
Macintosh 640×
480@67Hz
Macintosh 832×
624@75Hz
Macintosh 1152×
870@75Hz
Macintosh 1280×
960@75Hz
PC-9801 640×400@56Hz
PC-9821 640×400@70Hz 25.2 MHz
70.15
37.86
72.81
37.5
VESA 640×480@72Hz
VESA 640×480@75Hz
VESA 800×600@56Hz
VESA 800×600@60Hz
VESA 800×600@72Hz
VESA 800×600@75Hz
VESA 1024×768@60Hz
VESA 1024×768@70Hz
VESA 1024×768@75Hz
VESA 1152×864@75Hz
VESA 1280×960@60Hz
31.5 MHz
31.5 MHz
36.0 MHz
40.0 MHz
50.0 MHz
49.5 MHz
65.0 MHz
75.0 MHz
78.8 MHz
108.0 MHz
108.0 MHz
75
35.16
56.25
37.88
60.32
48.08
72.19
46.88
75
48.36
60
56.48
70.07
60.02
75.03
67.5
75
60
60
63.98
60.02
79.98
75.03
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
VESA 1280×1024@60Hz 108.0 MHz
VESA 1280×1024@75Hz 135.0 MHz
Horizontal
Vertical
Chapter 5 Reference
25
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This
means that your display is designed, manufactured and tested according to
some of the strictest quality and environmental requirements in the world.
This makes for a high performance product, designed with the user in focus
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
● Good visual ergonomics and image quality in order to improve the working environment for the user
and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Energy
● Energy-saving mode after a certain time - beneficial both for the user and environment
● Electrical safety
Emissions
● Electromagnetic fields
● Noise emissions
Ecology
● The products must be prepared for recycling and the manufacturer must have a certified environmental
management system such as EMAS or ISO 14000
● Restrictions on
● chlorinated and brominated flame retardants and polymers
● heavy metals such as cadmium, mercury and lead.
The requirements includes in this label have been developed by TCO Development in co-operation with scientists,
experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in
influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays
in 1992 and is now requested by users and IT-manufacturers all over the world.
For more information, please visit
Chapter 5 Reference
26
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone: (562) 431-5011
declare that the product
Trade name: EIZO
Model: FlexScan S1701, S1721, S1731, S1901, S1911,
S1921, S1931
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the
limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (D-SUB mini 15 pin - D-SUB mini 15 pin, the enclosed signal cable)
- Stereo mini-jack cable (Speaker applied model)
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
27
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a)Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät
und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der
zugehörenden Bedienungsanleitung angegeben.
b)Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher
als die Augenhöhe eines Benutzers in sitzender Position ist.
c)Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der
Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt.
d)Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach
hinten ≥ 5°).
e)Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale
Kraftaufwand dafür muß weniger als 100 N betragen.
f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.
g)Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).
h)Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position
kippsicher sein.
Hinweis zur Ergonomie :
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 1280 ×
1024 RGB analog, 0,7 Vp-p und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus
ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte
Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)
„Maschinenlärminformations-Verordnung 3. GPSGV:
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“
28
Recycle Auskunft
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem
Partner eds-r gmbh rucknahmesysteme. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der
Wiederverwertung zugeführt werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu erfahren,
benutzen Sie bitte folgende Rufnummer: 02153-73 35 00. Weitere Informationen finden Sie auch unter der
Recycling Information for customers in Switzerland:
All recycling information is placed in the SWICO’s website.
Recycling-Information für Kunden in der Schweiz:
Alle Informationen zum Thema Recycling finden Sie auf der Homepage des Brancheverbandes SWICO.
Renseignements de recyclage pour les clients en Suisse:
Vous trouvez tous les renseignements pour le sujet de recyclage sur la page WEB de I’UNION DE BRAN CHE
SWICO.
Recycling Information for customers in USA:
All recycling information is placed in the EIZO Nanao Technologies, Inc’s website.
Återvinnings information för kunder i Sverige:
All information om återvinning finns på Eizo Europe AB:s hemsida:
29
|