P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 1
En
Fr
Hi-Speed USB 2.0
De
Nl
Es
It
7-Port Hub
Connect up to 7 Hi-Speed USB 2.0 or USB 1.1 devices
User Manual
F5U237ea
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 3
TABLE OF CONTENTS
En
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
The Belkin Advantage . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
System Requirements for Mac® . . . . . . . . . . . . . . . . . . . . . . .3
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 4
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 1
INTRODUCTION
En
Congratulations and thank you for purchasing the Belkin Hi-Speed USB
2.0 7 Port hub (the Hub). The hub provides 7 downstream USB ports
that are compatible with both USB 1.1 (Low Speed and Full Speed)
devices, as well as with USB2.0 (Hi-Speed) devices.
This means that the Hub is “backward-compatible” with all of your
current USB 1.1 devices as well as the new generation of “Hi-Speed”
USB 2.0 devices. This may include such peripherals as scanners, printers,
mass storage devices, and high resolution cameras. The Hub is self
powered, which allows the cascading of devices with additional hubs, so
that up to 127 USB devices to be connected to a single port.
1
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 2
OVERVIEW
The Belkin Advantage
An exciting new feature unique to the Belkin 7 port hub are the two
vertically mounted downstream USB ports that offer easy access for
temporary connections such as USB thumb drives, media readers, and
personal convenience accessories such as USB lights and fans. The Hub
also provides 7 port status LEDs, and 1 master power LED.
Features
• Compliant with Universal Serial Bus Specification 2.0 (data rate
1.5/12/480 Mbps)
• Backward-compatible with Universal Serial Bus Specification 1.1
(Data Rate 1.5/12 Mbps)
• Compatible with Windows 98SE, Me, 2000, and XP
• Approved by USB Implementers Forum (USB-IF)
• Supports Plug and Play specifications
• Supports “hot swapping” of USB devices
• Over-current detection and protection
• Individual Port Status Indicator LED’s
• Five horizontally mounted 480 Mbps downstream ports
• Two vertically mounted 480 Mbps downstream ports
• Fully compatible with USB 1.1 and USB 2.0 devices
• Compact slim-line design
• Two hubs may be stacked on top of one another
2
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 3
OVERVIEW
En
System Requirements for Mac®
• Supports low- (1.5Mbps) and full-speed modes (12Mbps) on USB-
enabled Mac computers prior to PowerMac® G5
• Supports low- (1.5Mbps), full- (12Mbps), and high-speed modes
(480Mbps) on PowerMac G5 and above, or on other Mac computers
equipped with a USB 2.0 upgrade card
Package Contents
• High Speed USB 2.0 compliant 7 Port Hub
• AC Power Adapter
• User Manual
• USB device cable
3
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 4
OVERVIEW
Technical Specifications
Upstream Ports
Downstream Ports
Per-port Voltage
Per Port Current
Power Mode
Operating Temperature
Storage Temperature
Enclosure
(1)
(7)
DC +5V
500mA (max)
Self-Powered
5ºC ~ 40ºC
-20ºC ~ 60ºs
ABS
Power Supply
Output:
DC 6V, 4A
Plug Size:
Plug Polarity:
3.5mm (outer) 1.0mm (center)
Center Positive
Main Power LED Color Definitions:
Off
Red
Not Operational
Operational
Port Status LED Color Definitions:
Off
Green
Over Current Condition
Fully Operational
4
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 5
INSTALLATION
En
Important Note: Do not connect USB devices to the hub until you are
instructed to do so in step 4 of this user guide.
1. Plug the AC adapter into a wall outlet, or surge suppressor. Plug the
DC connector into the DC Power Jack found on the rear of the hub
2. Plug the flat end (USB A connector) of the provided USB device cable
into the downstream port of your computer, or downstream port of
another hub, then plug the other end (USB mini B connector) of the
device cable into the upstream port on the rear of the hub.
Important Note: The hub must be connected to a USB 2.0 compliant host
in order to function in Hi-Speed mode (480Mbps data
rate). If the hub is connected to a USB 1.1 compliant
host, it will operate only in Low Speed or Full Speed
mode (1.5 Mbps/12 Mbps).
3. Windows will now detect your hub and install the required driver
support. (The Windows “Install New Hardware Wizard” may prompt
you to provide your Windows Installation CD to complete the driver
installation process).
5
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 6
INSTALLATION
Important Note: Hi-Speed hub drivers are included with most USB 2.0 PCI
upgrade cards, and are pre-installed along with the PCI
card drivers. If you purchased an upgrade card prior to
the release of Hi-Speed hub support, please check with
your PCI card vendor for an updated USB 2.0 driver. The
Belkin USB 2.0 driver supports all competitive cards
based on the NEC host controller with the exception of
Adaptec. The most recent Belkin driver is available at
4. Plug the USB-A connector of the USB device, or an additional hub,
into any of the downstream ports of the F5U237.
Important Note: When moving a device from one port on the hub to
another, it may be necessary to re-install the USB drivers
for that device.
6
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 7
INFORMATION
En
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC
COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole
responsibility that the product:
F5U237
to which this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CE Declaration of Conformity
We, Belkin Corporation, declare under our sole responsibility that the F5U237, to which this
declaration relates, is in conformity with Generic Emissions Standard EN 55022:1998 Class B,
EN50081-1 and with Generic Immunity Standard EN50082-1 1992.
Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials and workmanship for its
lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no
charge provided it is returned during the warranty period, with transportation charges prepaid,
to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may
be required.
This warranty does not apply if the product has been damaged by accident, abuse, misuse, or
misapplication; if the product has been modified without the written permission of Belkin; or
if any Belkin serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,
WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or
addition to this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING
BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING
OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.
7
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 8
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin Components, Ltd.
Express Business Park
Shipton Way • Rushden • NN10 6GL
United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin GmbH
Hanebergstrasse 2
80637 München • Germany
Tel: +49 (0) 89 1434 05-0
Fax: +49 (0) 89 / 143405-100
Belkin Tech Support
US: 310.898.1100 ext. 2263
800.223.5546 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 666 040
© 2003 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
P74387ea
|